Happy with the look of the exhaust and managed to get a nicer bend up at the can...much better than it was...
Announcement
Collapse
No announcement yet.
1982 gs1100e
Collapse
X
-
Well things are coming along....I have some details left like swapping those hideous bars out (motocross bars, really?) Lol
The side covers have some tab repairs needed....I need to bleed the brakes, clean up the gauges....oh and disconnect the wire that goes to the battery for the idiot light on the dash.
Plus the tank is not hooked up yet.....I'm falling in love with the bike now....there were thoughts of selling but I don't think I can do it....to perrrty. Lol
Really happy that I bent the exhaust can up a bit too....
No signature :(
- Likes 3
Comment
-
Well it's really close now...today I decided to take pics to send into our Gov (Commie) insurance to apply for a collector plate...can't imagine it would get turned down. I think it's turned out to be one of the nicest restorations I have done....first time I have had a bike professionally painted.
No signature :(
Comment
-
Really Really nice job on the entire project...What's with the cam end caps, the chrome ones shouldn't have the ridges, the ones with ridges should be black W/ silver ridges, did you get those chrome plated, just a huge amount of polishing??? Looks good, but personalized.1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100
Comment
-
Originally posted by rphillips View PostReally Really nice job on the entire project...What's with the cam end caps, the chrome ones shouldn't have the ridges, the ones with ridges should be black W/ silver ridges, did you get those chrome plated, just a huge amount of polishing??? Looks good, but personalized.No signature :(
Comment
-
Just personal preference, no wrong answers... My personal opinion I like the chrome ones on the black eng. for a little contrast, also like the black on the silver eng. for same reason. If those caps are the only thing I can find to pick on, You did great. Now, are you planning on riding this bike??? It deserves to be ridden but wouldn't deserve the results dust, dirt, bugs, road grime. Again Great job.1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100
- Likes 1
Comment
-
Originally posted by rphillips View PostJust personal preference, no wrong answers... My personal opinion I like the chrome ones on the black eng. for a little contrast, also like the black on the silver eng. for same reason. If those caps are the only thing I can find to pick on, You did great. Now, are you planning on riding this bike??? It deserves to be ridden but wouldn't deserve the results dust, dirt, bugs, road grime. Again Great job.
But after seeing the almost finished product, it would be hard to sell it I think.
Now I have to get a new reg/rec....surprise surprise....lolNo signature :(
Comment
-
Originally posted by trevor View Posta new reg/rec....surprise surprise....lol
My un-calculated (?) EZ suprises....
1 - Twisted crank
2 - Clutch basket. Grooves from the steels and stripped aluminum basket nut.
3 - Small crank end nut. It came loose and ate up the taper where the start clutch mounts.
4 - Warning light module. I'm on my 4th unit. still wanky !
5 - I'm on my 3rd RR
6 - Speed instability. Not a wobble but more like a weave. Very unnerving.
7 - Carbs need orings.
Kudos on a very nice resto Trev !!
82 1100 EZ (red)
"You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY
- Likes 1
Comment
-
Originally posted by bonanzadave View PostI saw a pic of the forks off. Did they come apart ? Still got the anti-dive ? Me too.No signature :(
Comment
Comment