My last GS project

[geek]

The train derailed. I made have made no progress on this project and now starting to question the whole point of it......

I picked up some used fuel injection parts from a Hayabusa and then started reading up on what the hackers had done with it. I keep finding more sites, and have been glued to the computer for months in an all out ADHD manic state. About a month ago I decided to build a motorcycle simulator to test this stuff out on...

My diesel powered dragbike...

http://www.youtube.com/watch?v=rZ6GD60m3QY

Showing the arb in operation

http://www.youtube.com/watch?v=k2GLLCdbGPI

Software that runs it all

http://www.youtube.com/watch?v=DR6tFWjQiPw

More on the software

http://www.youtube.com/watch?v=mPsAc5qBIsY

Hacking the hacker tools

http://www.youtube.com/watch?v=LoV3ATykbIY

The BigToe

http://ecuhacking.activeboard.com

[geek]

https://www.youtube.com/watch?v=5aiAZRtiFyw

Making some progress.

[geek]

Made up an adapter for the air filter and cut the tubing.

[geek]

The air filter adapter.

[hotrods316]

coool, glad you made some progress, what turbo did you use? I want to find a turbo in the junkyard and put on a little 400 xs that i am building, think that might be a good bike to put a little turbo on.

would diaphram cv carbs be ok to have blowthrought from a low psi turbo system. or would it be worth while to convert to the efi rack i have just using two tbs instead of all 4.

also might try and convert to oil injection, can a gas engine be converted to a true rice burner??

[gmansyz]

Matt, you can blow thru the stock CV carbs. Nothing to it and even use close to the same jetting. Yamaha did it on the 650 Seca Turbo. Don't forget a fuel pump and regulator. Retard timing a little and a fair sized plenum. Mount Turbo up high enough so no drain back problems.
You may be able to convert to diesel but, need high compression. Like 18+:1 and the injection setup. Now the bottom end may not be strong enough for diesel use.
Laters
Greg

[geek]

Link to a friend of mine's front mounted draw thru XS650. I think he told me he was running a Mitsubishi turbo.

http://thexscafedotcom.wordpress.com/2011/06/23/xs650-cowboy3669-dragracer/

Garrett's welded up and mounted.

[hotrods316]

cool thanks for the link and the good read. will have to start hunting the local scrapyards for a turbo.

keep us updated on the project, its looking good.

matt

[geek]

He had a busa clutch on it at one time. Not sure what he is doing now. Biggest problem he has is the parts are drying up.

Mounted the intercooler

[geek]

From the other side.

[geek]

Setting up the wideband.

[geek]

Planning to mount the tablet on the side using Velcro strips.

[geek]

Bike is finally together.

[geek]

Just another view.

[trippivot]

nice Suzuki , it is about as Fast as fast gets -- The paint is really cool too.