.png "Powered by vBulletin")
Seems to be lots of bolt-on swingarm extensions for the Gsxr but few for the 1200 Bandit swinger. Anyone know if they are interchangeable? Looking for 4-6 inches.
-
Last edited by nastyjones; 10-13-2014, 12:22 PM.80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades -
I have busa bolt on extensions you can have if you wanna come get them. Not sure if they will work. -
It depends on the Bandit arm the 1st and 2nd gen Bandit 97 to 05 swing arms are the same and require a special swing arm extensions that only fit them as far as I know. Johnny Dobrin at Exoticycle in Sarasota Fl. has those extensions and the later model Bandit 3rd gen or 1250 Bandit is different than the other Bandits but it uses the same extensions as the 1st gen 99 to 07 Busa does.
The ones Exoticycle sells are 2" to 6" over. I have used these in the past and they work great. I have a pic of them on my burgundy Bandit in my profile albums it is the pic with the greenish back ground and it has a 6.12 dial in plate on it.
Dale Walker at Holeshot Performance has some also but I have never tried them.Last edited by stetracer; 10-13-2014, 06:59 PM.My stable
84 GSX1100EFG-10.62 @ 125 mph 64'' W/B.
85 GS1150-9.72@146mph stock W/B.
88 GSXR1100-dragbike 9.18@139.92mph/5.68@118mph.
98 Bandit 1200-9.38@146mph/6.02@121mph.
90 Suzuki GS 1425cc FBG Pro Stock chassis 5.42@124mph
06 GSXR750 10.44@135mph
00 Honda elite 80 pit bikeComment
Comment