Announcement

Collapse
No announcement yet.

1150 intake cam in my 1100

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1150 intake cam in my 1100

    I got ahold of a gs1150 intake cam to install in my 80 GS1100. What do I need for this installation? A slotted cam sprocket? Is it a straight drop in?

    Advice appreciated.

    Paul
    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

    #2
    Why only a intake cam? Unless the exhaust is same as the 1100. Should drop straight in but slotted sprockets would be more ideal. We had a full set in our Kat race bike and was sort of claimed there equal to 1100 stage 1 yoshi cams.

    Comment


      #3
      Yep, the exhaust cam is the same. Apparently the 1150 intake cam is worth a few horsepower. I'm not sure if I have to dial in the new cam or not.

      Waiting for an answer.
      80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

      Comment


        #4
        If you use the 1150 exhaust cam you will lose the tach drive gear.

        Comment


          #5
          you will want to degree the cam, I'm told by those more knowlegeable than myself that to not degree it is a waste of time. If you haven't done that before, it takes some figuring out, or it did for me, but it ain't rocket science. I have a few things that might be helpful, pm me if you want.
          1983 GS 1100 ESD :D

          Comment

          Working...
          X