.png "Powered by vBulletin")
If you just want to clean your valves and combustion chamber....there's a magical substance you can use....
Distilled water.... Get a plant type sprayer (like a windex deal or something..).
With the bike running at say 2500 rpms or less...warmed up...airbox off obviously... Use a spray bottle to mist the water into each carb as it's running....Use warm/hot water...... Just spritz it in...not too heavy tho.... light shots of water (Fine mist...).
It basically will steam clean the valves and combustion chamber... gets rid of carbon that gets built up on the valves/ in the head....
The water wont hurt the engine ( short of you putting a deluge of water into a cylinder and hydrolocking it....). If the water concerns you just do a an oil change afterwards....
Anyway...this post made me think of that....
Distilled water.... Get a plant type sprayer (like a windex deal or something..).
With the bike running at say 2500 rpms or less...warmed up...airbox off obviously... Use a spray bottle to mist the water into each carb as it's running....Use warm/hot water...... Just spritz it in...not too heavy tho.... light shots of water (Fine mist...).
It basically will steam clean the valves and combustion chamber... gets rid of carbon that gets built up on the valves/ in the head....
The water wont hurt the engine ( short of you putting a deluge of water into a cylinder and hydrolocking it....). If the water concerns you just do a an oil change afterwards....
Anyway...this post made me think of that....
Comment