Also, electrical faults seem to come at night when it's harder to work on. I have a small Mag Lite which I wrapped some electrical tape around near the end. It makes it easy to hold in your mouth, leaving both hands free.
Announcement
Collapse
No announcement yet.
Connectors
Collapse
X
-
Bucko
Another handy hint is to photocopy the wiring diagram, but shrink it to either half or third size. Go over it with texta to do the colours, then have it laminated and leave it under your seat. Keeps it weather proof and it's there if you need it.
Also, electrical faults seem to come at night when it's harder to work on. I have a small Mag Lite which I wrapped some electrical tape around near the end. It makes it easy to hold in your mouth, leaving both hands free.
-
RJ
I got a wiring harness for my '82 1100E from Bikebandit. They may not have one for all models but I'm sure they can cover most. Cost me $180, worth every penny.
Comment
-
Planecrazy
Originally posted by hungrymanSpeaking of connectors. Does anyone know where to get some good 9 pin water tight units? Actually, 4, 6, 9 would be nice.
Regards,
Comment
-
jm_foote
Be sure to smear some dielectric grease on those connectors too.
If you want to be as anal retentive about your connections as me, you can also solder the connectors on.
I also wired in an ATC fuse as I feel they are much more reliable.
Comment
-
Mel V
-
Joe Guilbeau
Originally posted by hungryman View PostSpeaking of connectors. Does anyone know where to get some good 9 pin water tight units? Actually, 4, 6, 9 would be nice.
Give these guys a shot...
Comment
-
tcraft128
If you google MOLEX, they have a wide variety of connectors in many different applications. VERY high quality. We use them exclusively on our aircraft....and my GS!
Comment
-
tcraft128
-
rkubik
Molex crimpers
I tried some at a local parts place (the oddly named B&E Electronics: the place where burglars shop for electronics I suppose?). But could not figure out how to make a crimp. The counter guy was no help.
Am I just a spaz, or is there some advice you can pass on as to how to form those crimps?
Comment
-
tcraft128
-
greggo2208
Connectors? Need advice
I'm new to the GS resources, and new to the GS world period. I recently bought an 83 GS 750ES. Things were good until my ride to work this morning. Out of nowhere, my tach quit working, along with all my lights except the headlight. No turn indicators on instrument cluster, no gear indicator, no neutral indicator.. Nothing? Any one have any ideas where to start trying to track down the issue?
Comment
-
Originally posted by greggo2208 View PostI'm new to the GS resources, and new to the GS world period. I recently bought an 83 GS 750ES. Things were good until my ride to work this morning. Out of nowhere, my tach quit working, along with all my lights except the headlight. No turn indicators on instrument cluster, no gear indicator, no neutral indicator.. Nothing? Any one have any ideas where to start trying to track down the issue?
Repost in the tech section and we will get to the bottom of it.Believe in truth. To abandon fact is to abandon freedom.
Nature bats last.
80 GS850G / 2010 Yamaha Majesty / 81 GS850G
Comment
-
Originally posted by Bucko View PostAlso, electrical faults seem to come at night when it's harder to work on. I have a small Mag Lite which I wrapped some electrical tape around near the end. It makes it easy to hold in your mouth, leaving both hands free.sigpic[Tom]
“The greatest service this country could render the rest of the world would be to put its own house in order and to make of American civilization an example of decency, humanity, and societal success from which others could derive whatever they might find useful to their own purposes.” George Kennan
Comment
Comment