engine beautification

[bcrowther]

Give this a try

http://www.yourchoicetruckwash.com/cooper_products.htm

Or

http://www.trucksoap.com/polishing.html

And I sent out ??? to other places that may. I will post If I find anythign.

[cloudbreakmd]

I have some old CM case covers lying around so I thought I would experiment.

Step 1 aircraft stripper...

Well it mostly did the trick, but there will still areas that I wasunhappy with so they are soaking in the stripper now.

Before pictures:



After pictures to follow when I am done.

[cloudbreakmd]

Just hosed them off... But I am still very skeptical that I will be able to get the black areas and chalky white areas out. What are the black and chalky white areas?

[tconroy]

I dont know about the black areas but I think the white areas are just leftover clearcoat that didnt come off.

[J_C]

It'll sand out. Try the wet sand paper or steel wool. Might even polish out

[RIFLEMAN]

Give this a try

http://www.yourchoicetruckwash.com/cooper_products.htm

Or

http://www.trucksoap.com/polishing.html

And I sent out ??? to other places that may. I will post If I find anythign.

Thats the stuff! I get it at the local truckstop. Also,my employer supplies it.
renobruce,
I have had the pleasure of using the S100 products. I also give them a hearty endorsement. The only downside(besides the price0 that I have noticed is that it seems to encourage galvanic action between disimilar metals. If you have a steel bolt in a threaded aluminum hole and the bottom of the hole is open,it can make getting the bolt out difficult.
Other than that I really like it.