.png "Powered by vBulletin")
Mine came from a flea mkt, baught it new, back in 1981, for $5. I only use it on my own stuff, as I'm not a mechanic. It's always worked perfect, still use the 4 bits that came with it. I'd rather not use a good one, cause if I saw how much better they were, I may be forced to buy one.
-
1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100 -
$184.50????? *cough* *hack* *choke* *die*Originally posted by denydog View PostI guess that's the difference. I've been using an impact driver for 25 years, and hope it will last 25 more \\
/ Oh ya, the Sears driver is not top quality. That would be the Snap-on http://buy1.snapon.com/catalog/item....re&dir=catalog
Methinks a $25 Craftsman will be quite good enough.
If you really want to spend some dough, there's also Facom and Kowa Seiki. Some of this stuff is pure jewelry.Last edited by bwringer; 02-26-2007, 02:32 AM.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!Comment
-
I use craftsman. It works great. The bits are solid and I use them sometimes for some dodgy phillip heads. They grab very well.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Impact Driver
Ryobi makes a cordless 18 volt impact driver that works very well taking everything from small fasteners on carbs to engine cases. It also works much better than a power drill for installing deck screws. With battery and charger its about $80 at Lowes. Its one of the most useful tools I've bought in the last several years.Comment
Comment