Announcement
Collapse
No announcement yet.
Me so Horn-eee
Collapse
X
-
Me so Horn-eee
After about 10 years of listening to horns that sound like a sick goose, I thought Id try a $10 replacement. It worked a couple years ago on an old Honda I had. This time on the GS all I got was a bee...and then the fuse blew. So I break out a can of electric contact cleaner and proceed to fill up the old orig horns with cleaner through the little adjuster screw I removed. 1/2 a can later and some shaking for good measure both horns WORK like new. Been a long time since I heard that sound. \\/82 1100 EZ (red)
"You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTYTags: None
-
gsgeezer
I wish I had some air horns, to help alert those trucks on I-95. I have thought about putting some on, but wondered where to put the compresser.
-
The FIAMM horns work pretty well
You can buy a pair in high/low tone combination, and it has that dissonant tractor/trailer sound that gets people's attention, and each horn is 130 dB. You should use a relay so the button isn't handling too much current, just enough to pull in the relay. I wired the feed up directly from the battery on the horn side, and you can put a fuse inline to protect your electrical system. They're not air horns, but they're pretty good!1979 GS 1000
Comment
-
You don't need air horns. :shock:
Just go down to Wal-Mart or your favorite auto part store and get the Highway Blaster horns. Get both, the high and low tones. You may need to install a relay, especially if the horns only have a single terminal and are grounded through their mounts.
You will still sound like a truck, but it will be more like a Silverado or F150 than a Peterbilt. 8-[
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 19276
- Toronto, Canada
It may not have been the cleaner that did the trick, but the removal and re-insertion of the adjuster.
I have had a seemingly dead horn resurrected with nothing more than a twist of the adjuster.Bertrand Russell: 'Men are born ignorant, not stupid. They are made stupid by education.'
Comment
-
swrupert83
Comment