ignition module not getting power

[schlyme]

so i figured i am not getting power to my ignition module. i also figured out that the problem is at the connecter. so i'm getting a used one to change it out. well today i was at the local electronic supply place getting a relay to put a gianormous horn on my honda cruiser, and i mention to the guy at the counter about my problem. so he takes me over to where the connecters are. of coarse they don't have one like on the gs but they do have the pins so i get me some pins and a pin remover tool to change it out and see if that will fix it i'll still get the other one as a back up, or use it and keep mine as a backup.

[sschering]

Eastern Beaver should have the correct connector and pins

http://www.easternbeaver.com/Main/Elec__Products/Connectors/connectors.html

If they don't have it check out Vintage Connections.

http://www.vintageconnections.com/

They have a good deal on an open barrel crimp tool.