cheapish long bent circlip pliers....

[Guest]

guys i,m after a dealer or company in usa,,, that sells bent circlip pliers bent and about 2-3" legs to go down the slides of my carbys ,,, as i,m having trouble finding them in australia ...regards david from kaniva

[SqDancerLynn1]

Make some ! get a pair of needle nose pliers and grind the ends down to fit the C clips

[coolksprt]

Or get a compass (the thing with maps and charting). Fine tips and can be bent. Worked for me on my Master Cylinder rebuild.

Kev

[rapidray]

I have a longer, straight, Snap On set that I use that work great. Ray.

[Billy Ricks]

I use hemostats to get at the needle clips.

[doctorgonzo]

Make some ! get a pair of needle nose pliers and grind the ends down to fit the C clips

That's what I did.

[chef1366]

I use hemostats to get at the needle clips.

And what else?

That's what I did.

Me too. Cheapo Harbor Freight needle nose pliers.

[bwringer]

Motion Pro makes them, and many places sell them:

http://www.motionpro.com/motorcycle/partno/08-0279/

Perhaps you can search for that MP part number and find a place that will send a pair to Oz.



Z1 Enterprises has experience with international shipping, and they're great people. I'd check with Jeff first.

http://www.z1enterprises.com/detail.aspx?ID=2868

[Suzuki_Don]

guys i,m after a dealer or company in usa,,, that sells bent circlip pliers bent and about 2-3" legs to go down the slides of my carbys ,,, as i,m having trouble finding them in australia ...regards david from kaniva

Why do you want to purchase them from the States. Just buy a pair of long nose pliers and grind the tips down to the appropriate size and you have the perfect tool. I just clamped a small angle grinder in the vice and rotated the points of the pliers on the disc till they were the correct size. If you are still having trouble I will send my pair down to you overnight Express Post.