Announcement

Collapse
No announcement yet.

Petcock Questions 1980 GS750

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Petcock Questions 1980 GS750

    The current setup on my GS works ok, but it is not stock. I am thinking of having some carb work done and it might be a good time to change petcocks. I am very wary of vacuum petcocks. Anyone have any advice about choosing the OEM Suzuki part versus a possible alternative? Thanks David

    #2
    Vacuum petcocks are great, but the one on 1980 Suzukis is a very bad choice.
    The problem is the bolt spacing is different than the other years, and there isn't much room under the gas tank for a Pingel or other brand...
    You may be stuck with a stock replacement.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment


      #3
      i did this, but made my own plate vs buying the blank. cost me 15 bucks total.



      The valve is available from biker's choice.

      Comment

      Working...
      X