Announcement

Collapse
No announcement yet.

Damper Rod Holding Tool with Pic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Damper Rod Holding Tool with Pic

    Hi,

    I changed the seals on my forks (78 GS1000) and I had some trouble with the bottom Allan Bolt. My impact was at work so I didn't have anything fast enough to unscrew it.

    So I made myself a tool with a 1/2'' round stock that was lying around.
    Along with a 1/2'' bolt for it's hex head. (the correct measurement is 19mm but 3/4'' is almost the same)

    Total cost: 0$ Total time: 15 min.

    I welded a T type handle and welded the bolt on. The distance between the handle and the bolt is 18''.
    Now I can unscrew it by hand, very handy.

    Marc

    https://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
    1978 GS1000C X2
    1978 GS1000E X2
    1979 GS1000S
    1979 gs1000
    1983 gs400e
Working...
X