Announcement

Collapse
No announcement yet.

front brake light switch spring option

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    front brake light switch spring option

    i took apart my front brake switch for the rear light to clean and try to get working again. i read basscliffs post on his page and what happend? i lost the spring. the only thing i could think of was how can i find a spring this small? i took apart a click pen and behold the spring inside will fit and work. i had to use some wire cutters and trim the length but but fit and works. wallah!

    #2
    Originally posted by yotaman423 View Post
    i took apart my front brake switch for the rear light to clean and try to get working again. i read basscliffs post on his page and what happend? i lost the spring. the only thing i could think of was how can i find a spring this small? i took apart a click pen and behold the spring inside will fit and work. i had to use some wire cutters and trim the length but but fit and works. wallah!
    That's the standard replacement part, even in a main agents (well it was when I worked there).

    In years to come, archaeologists will wonder what on earth all those thousands of lost brake switch springs could have been used for and at the same time laugh at all the pens that never seemed to work.....
    79 GS1000S
    79 GS1000S (another one)
    80 GSX750
    80 GS550
    80 CB650 cafe racer
    75 PC50 - the one with OHV and pedals...
    75 TS100 - being ridden (suicidally) by my father

    Comment

    Working...
    X