Announcement

Collapse
No announcement yet.

Simple fix to an annoyance with battery terminals

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    brilliant! - now that is out of the box thinking!
    I usually have similar brainwaves- but must admit I have never thought of that and I do have the exact problem! put glue and grease and all sorts to hold the nut in place.

    cheers for that.

    Comment


      #17
      Originally posted by chuck hahn View Post
      I snip two small pieces of the clear tubing that comes with them and do the same thing.
      Ditto, same that i do, works great. But i prefer the batteries with the thick nuts.

      Comment


        #18
        Originally posted by Garand1 View Post
        But i prefer the batteries with the thick nuts.

        Thats what she said....



        haha, sorry, had to say it

        Comment


          #19
          That is a really good idea!

          Comment


            #20
            Originally posted by chuck hahn View Post
            Save those crusty carb drain hoses now and then ..you can snip pieces from them to stuff under the nuts too.
            So...you have a crusty hose stuffed under your nuts?
            ...don't they have salves or unguents for that?

            Comment


              #21
              Originally posted by wkmpt View Post
              So...you have a crusty hose stuffed under your nuts?
              ...don't they have salves or unguents for that?
              I think there might be a poultice for that

              Comment


                #22
                Okay this thread degraded far enough already LMAO crusty hose and rusty nuts lordy!
                sigpicMrBill Been a GSR member on and off since April 2002
                1980 GS 750E Bought new in Feb of 1980
                2015 CAN AM RTS


                Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.

                Comment

                Working...
                X