.png "Powered by vBulletin")
After sitting all winter, I fueled up my 78 GS1000 and gas started to leak out of the tuebs that interconect the carbs. I checked with my local Suzi dealer and it truned out that the tubes are discontinued. I ended up using Permatex number 2 form-a gasket. Its nonhardening and and gas resistant. I just smeared alittle on the seals when I put the carbs back together and I haven't had any problems with them since.
-
-
dont they have o-rings on em? why not just change the o-rings? -
They don't have any o-rings on the fuel tubes.Originally posted by crazyguyAnd on the seventh day,after resting from all that he had done,God went for a ride on his GS!
Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!
Comment
-
My '79 750 has fuel tube O rings, but some 1000s don't. The "O ring" part is molded rubber on the outside of the fuel tubes. Someone I know has a 1000 that he needs the molded type fuel tubes for. Does anyone have some?
HarrisonComment
-
What I meant was the fuel tubes don't use true o-rings. The rubber covering has raised ribs.And on the seventh day,after resting from all that he had done,God went for a ride on his GS!
Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!Comment
-
Permatex 2 is a cure all, I found a few vacume leaks between my head and intake tubes and the permatex sealed them upComment
-
Think it would work in that ever-oily connection of the tach cable to the engine?Originally posted by JATOBelieve in truth. To abandon fact is to abandon freedom.
Nature bats last.
80 GS850G / 2010 Yamaha Majesty / 81 GS850GComment
-
All I can say is try it. That isn't leaking on my bike yet, but if it was I'm sure I'd use the permatex.Comment
Comment