Need good shock bushings?

[Guest]

I have been looking for decent shock bushings to replace the crap ones that come with MDI or Progressive shocks and found this listing on Ebay:

http://www.ebay.ca/itm/290859532305?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

These ones fit my MDI shocks perfectly, I got 12mm ones to fit the upper mount on my '82 750. They ship from UK, took only just over a week to get them.
If you look at his other listings he has other sizes to fit different shock eye sizes. I took some pics.
Comes with for bushings and lots of washers, the rubber is much better quality. They are a tight fit which is good, I used a bit of oil to install them into the shocks, and had to file the shock mount, mine was mushroomed over.
As far as I can tell these ones are a good fit for Progressive shocks:

http://www.ebay.ca/itm/SHOCK-ABSORBER-BUSHES-FOR-MOTORCYCLES-FT-steel-insert-Kits-for-bikes-quads-etc-/290874486533?pt=UK_Motorcycle_Parts&hash=item43b9786f05

[salty_monk]

Look good... you can also rob some from your stock shocks & I believe stock ones are still available from Suzuki.

[gearhead13]

Look good... you can also rob some from your stock shocks & I believe stock ones are still available from Suzuki.

I dont have any stock rear shocks, the bushings arent listed seperately, they show the bushings that are in the swingarm, but I have no idea if they fit.

[gearhead13]

I have gone for a couple of rides since the install and the rear end feels much more steady and planted. Small upgrade makes quite a difference.
Stealing 30 year old bushings from stock shocks isnt worth it IMHO.