Announcement

Collapse
No announcement yet.

Homemade Tubing to check the Carb Bowl Fuel Levels

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Homemade Tubing to check the Carb Bowl Fuel Levels

    I just did this and documented it on my site. I haven't tested it yet; The glue is still curing.


    #2
    Nice way to document what you are doing.

    It's a good hack. Keep us up to date.

    I have a store-bought gauge. The hose attached to the plug is fairly stiff and I have a bugger of a time trying to get it screwed into place with the hose attached. Particularly to the inboard carbs.
    '83 GS650G
    '83 GS550es (didn't like the colours in the 80's, but they've grown on me)

    Comment


      #3
      I drilled out 4 screws and soldered 1/2 of copper pipe onto them. Not much clearance under there so it has to be short and sweet.
      1981 GS650G , all the bike you need
      1980 GS1000G Power corrupts, and absolute power corrupts absolutely

      Comment

      Working...
      X