I used a Dremel to grind the sides down on one of the bits from my impact driver (the $10 one from Harbor Freight). A bench grinder would have been better, but it didn't take long with the Dremel. This resulted in a snug fit. After warming up the area a bit with a heat gun, the jets each came out with a couple smacks of the hammer. I was very happy not to resort to drilling!
Announcement
Collapse
No announcement yet.
Pesky and stuck pilot air jets
Collapse
X
-
Pesky and stuck pilot air jets
Maybe this has been repeated over and over on the forum, but I had trouble finding an answer, so in case someone is ever struggling with those deeply recessed but narrow pilot air jets, this is what worked for me...
I used a Dremel to grind the sides down on one of the bits from my impact driver (the $10 one from Harbor Freight). A bench grinder would have been better, but it didn't take long with the Dremel. This resulted in a snug fit. After warming up the area a bit with a heat gun, the jets each came out with a couple smacks of the hammer. I was very happy not to resort to drilling!Drew
1981 GS650L (one step at a time...lots to do)
1994 Honda Shadow VLX (for sale in spring)
2011 Suzuki DL650Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
The air jets don't gunk up. I'd leave them in place if they don't come out easily.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Yeah - I didn't mention PB Blaster, but that was the first thing I tried...multiple shots.
Good to know they don't absolutely need to come out in the future. They did look pretty clean compared to everything else.Drew
1981 GS650L (one step at a time...lots to do)
1994 Honda Shadow VLX (for sale in spring)
2011 Suzuki DL650
Comment
-
Forum GuruPast Site Supporter
Super Site Supporter- Jun 2018
- 5541
- Mifflinburg, PA / Land of Tar & Chip
Originally posted by martinlucasThe best way to deal with a pesky pilot air jet is to first locate it. It is the most common air jet to get clogged and prevent your toilet from refilling..
Martin, you some sorta bot?
Rich
1982 GS 750TZ
2015 Triumph Tiger 1200
BikeCliff's / Charging System Sorted / Posting Pics
Destroy-Rebuild 750T/ Destroy-Rebuild part deux
Comment
-
Originally posted by martinlucasThe best way to deal with a pesky pilot air jet is to first locate it. It is the most common air jet to get clogged and prevent your toilet from refilling. The problem with fixing it is that it is generally buried in the bowl, so you'll need to reach in there and find it! You can use a flashlight to help you identify it. Once you've located it, you can try to clean it with a pin, or a toothpick. If it is clogged with a large piece of debris, you may have to remove it with pliers.---- Dave
Only a dog knows why a motorcyclist sticks his head out of a car window
Comment
Comment