gsx 1100 E 1981 front brake master cyclinder

[slideplayer]

Hi peeps, the front master is leaking, so tried to buy a repair kit but no luck, probably the bore isn't good anyway after all these years, so the question is what cylinder will fit ? Not to keen on a used one, anyone found a new one at reasonable cost? Any advice most welcome. Many thanks.

[Nessism]

5/8" bore size is what you need. Lots of options in new and newer/used OEM units on eBay in the states. Not sure about France though. Just be sure to look for a mirror lug, since some masters don't have them.

[salty_monk]

I have used the ones from the EX650 with good success. They are cheap and a lot better than anything else you'll find out there "brand new" is my guess.

I'd trust something sourced from a good supplier like MikesXS (the also own z1 enterprises). https://www.mikesxs.net/search?p=2&q...t_list_dir=asc

[slideplayer]

Thanks folks, bought one from ebay in the states, so crossing my fingers. Many thanks for your advice.