Announcement

Collapse
No announcement yet.

gsx 1100 E 1981 front brake master cyclinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    gsx 1100 E 1981 front brake master cyclinder

    Hi peeps, the front master is leaking, so tried to buy a repair kit but no luck, probably the bore isn't good anyway after all these years, so the question is what cylinder will fit ? Not to keen on a used one, anyone found a new one at reasonable cost? Any advice most welcome. Many thanks.

    #2
    5/8" bore size is what you need. Lots of options in new and newer/used OEM units on eBay in the states. Not sure about France though. Just be sure to look for a mirror lug, since some masters don't have them.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      I have used the ones from the EX650 with good success. They are cheap and a lot better than anything else you'll find out there "brand new" is my guess.

      I'd trust something sourced from a good supplier like MikesXS (the also own z1 enterprises). https://www.mikesxs.net/search?p=2&q...t_list_dir=asc
      1980 GS1000G - Sold
      1978 GS1000E - Finished!
      1980 GS550E - Fixed & given to a friend
      1983 GS750ES Special - Sold
      2009 KLR 650 - Sold - gone to TX!
      1982 GS1100G - Rebuilt and finished. - Sold
      2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

      www.parasiticsanalytics.com

      TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

      Comment


        #4
        Thanks folks, bought one from ebay in the states, so crossing my fingers. Many thanks for your advice.

        Comment

        Working...
        X