Announcement

Collapse
No announcement yet.

Slotted 80-81 GS rotors on a 78 GS1000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Slotted 80-81 GS rotors on a 78 GS1000

    Can anyone tell me if there is a problem fitting the slotted rotors from the 80-81 GS1000 using the existing calipers (round pucks)?
    I have installed the newer rotors on my 78 GS1000E with the bolt holes lining up perfectly but I now can't get the old calipers to fit onto them. Also, the distance between the rotors and forks seem to be different per side too (I believe I assembled the axle and all the spacers correctly).
    I also have a newer set of calipers (square pucks) that look like Suzukis to use but I'm not sure. The bolt holes to the legs seem to be slightly off if they are.
    Help!

    #2
    Thanks for all the advice...

    Comment


      #3
      A search turned up this thread with some info on the swap.
      2@ \'78 GS1000

      Comment


        #4
        Thanks Steve! Much appreciated.

        Comment


          #5
          Yeah use them as a set is the way.... Or switch to the twin pots instead.
          1980 GS1000G - Sold
          1978 GS1000E - Finished!
          1980 GS550E - Fixed & given to a friend
          1983 GS750ES Special - Sold
          2009 KLR 650 - Sold - gone to TX!
          1982 GS1100G - Rebuilt and finished. - Sold
          2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

          www.parasiticsanalytics.com

          TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

          Comment

          Working...
          X