Announcement

Collapse
No announcement yet.

Rear brake MC rebuild

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rear brake MC rebuild

    Plunger was stuck and not returning on my rear master cylinder on a 1980 GS850GL. Got the old parts out with a little "persuasion". Going to get the bore cleaned out (looks to be in good shape) and ensure the return hole to the reservoir is clear. I have a K&L rebuild kit.

    My question - Is it good practice to soak the new rubber parts in brake fluid prior to reinstallation?
    - David

    80 GS850GL
    Arlington, TX

    https://visitedstatesmap.com/image/ARMNMTNDSDTXsm.jpg

    #2
    Check the bore for pits. If damaged, the rebuild won't work.

    No need to soak the parts. Just coat them before install, along with the bore.

    And where you are in there, be sure to break down the caliper for a good clean out, if you haven't done it already. And replace the brake line and lubricate the pivot point for the lever.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    Working...
    X