Announcement

Collapse
No announcement yet.

Gs1000 master cylinder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gs1000 master cylinder

    Hi everyone new to the forum names Keith I'm restoring a 78 gs1000EC stripped the front master cylinder new seal cleaned out doesn't seem to be pumping fluid now it's back together I'm attaching a photo of the components can someone please check if I have assembled it all correctly thanks in advance.
    You do not have permission to view this gallery.
    This gallery has 1 photos.

    #2
    The spring needs to flip around with the small end at the top of the piston. The rubber cup there needs to point away from the piston (same way as the one around the middle of the piston).
    - David
    80 GS850GL
    Arlington, TX
    https://visitedstatesmap.com/image/ARMNMTNDSDTXsm.jpg

    Comment


      #3
      Thank you David I didn't take a picture when I took it to bits and my memory isn't what it was lol

      Comment

      Working...
      X