Announcement

Collapse
No announcement yet.

Aluminum or stainless for caliper piston>

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    cool, glad you found something.

    I just found this for anyone else looking. It match's your measurements on the calipers, or is 1mm longer from what you ordered. But i bet you can make it work either sanding down the edge or sanding a little off the pad if things are a tight fit.

    https://brakecrafters.com/products/o-d-43mm-x-41mm-length-motorcycle-brake-caliper-316l-stainless-steel-piston?_pos=3&_psq=Outside+Diameter+%3D+43mm&_ss=e &_v=1.0
    Last edited by first timer; 04-04-2025, 04:12 PM.
    78 GS1000 Yosh replica racer project
    82 Kat 1000
    10 990 ADV-R The big dirt bike​
    Some dirt bikes

    Comment


      #17
      Yes, I noticed the 1mm after I triple checked after ordering. It'll work. I've got so many parts coming now for the Suzukis my head is spinning. 775 harness for the 750, this piston for the 750, another Kawie M/C for the 1100, new kawie piston for the M/C, new rear m/c for the 1100 and a new rear brakelight switch for the 1100. I was happy all my other caliper pistons were in good shape and I was lucky enough to find Suzuki seals for for both bikes as well.
      1986 1150EF
      2008 GS1250SEA

      Comment

      Working...
      X