.png "Powered by vBulletin")
Well my tire came in today so I figured I would put the caliper back together and have the bike all ready to go. Got the caliper back together ,put the tire on and tried bleeding the brakes. Well they are spongy to the point of uselessness. Right now I have the brake lever tied back like I've read helps so hopefully tomorrow I will be able to go on a ride.
-
-
you need to get a Mighty Vac to to suck the fluid through to the caliper. -
Put a long hose on the brake bleeder, open it & suck like crazy... that works too!
1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/Comment
-
I have heard of someone talking about pushing fluid up to remove air bubbles. If you open the caliper bleeder and push fluid in while cracking the master banjo seems like that would get rid of most of the air.Originally posted by salty_monk View PostPut a long hose on the brake bleeder, open it & suck like crazy... that works too!Comment
-
I bought a vac pump with the brake bleeder kit, but now the problem is I seem to be sucking air from around te bleeder screw rather than sucking fluid
Comment
-
try some teflon tape on the threadsComment
-
I tried bench bleeding the master kind of. I used a screwdriver to push in the piston , the feel is pretty good now.Comment
Comment