Calipers Dont Seem to Fit

[sparki]

Im cleaning the crud behind the seals now, why would that make the pads rub the wheels?

it may not make a difference if the pistons were FULLY pressed in BUT it will make a difference when you try to use them as they will stick... old, dried out or damaged seals will do the same thing.... also going back to my 2 previous times of asking.... have you bolted the caliper back top the hanger yet to get it correctly alligned?

if the pistons are fully in the caliper, the wheel correctly installed, and the caliper bolted up to the hanger, with old pads..... there is no way it could be as tight as your picture suggests.....