My left fork seal is ****ing and it's because I have a few burs that trashed it. Don't have the foggiest idea where the burs came from. Anyways I am looking to replace. Any thoughts?
Announcement
Collapse
No announcement yet.
Fork seal
Collapse
X
-
duper850
Fork seal
Sorry if double post somewhere's !!
My left fork seal is ****ing and it's because I have a few burs that trashed it. Don't have the foggiest idea where the burs came from. Anyways I am looking to replace. Any thoughts?Tags: None
-
What year 850?1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
-
BassCliff
Hi,
There are a couple of options for you. Finding a good used set on ebay is one. Getting a new set of tubes from Forking By Frank is another. There is also a repair option. SEE THIS THREAD in the forum.
Thank you for your indulgence,
BassCliff
Comment
-
shadowfist
Ok, I have a question too, I am getting ready to replace the seals on my 78 GS750 and was wondering if there is a guide, preferably with pics, to this endeavor. I haven't cracked those babies open yet and would love to see what i'm getting into ahead of time. (yes i searched but there are about a biilion and a half threads with the words "fork seal" in them.
Thanks again! you guys ROCK!
Comment
-
duper850
Comment