Announcement

Collapse
No announcement yet.

Tire Sizes 81gs1100e 110/90/19 and 130/90/17 on rear?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tire Sizes 81gs1100e 110/90/19 and 130/90/17 on rear?

    Just double checking on tire size for my '81 gs1100e.

    I am going to buy a set of dunlop spitfires. 110/90/19 for front and 130/90/17 for the rear. Just wanted to double check with the group before purchasing.

    Has anyone rode with this setup, and what did you think?

    -joe

    #2
    Spitfires are OK, I guess. Nothing special.
    Old tech stuff.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment


      #3
      Check your front rim width. Not sure if it will support a 110 or just a 100.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        Thanks I guess I better double check, I searched a bunch of threads on here and thought that I was seeing guys running 110's on the front.

        Comment


          #5
          What are you running on your 850's? I think they are the same rims on there.

          Comment


            #6
            110/90-19 will fit depending upon the fender but normally just run 100/90-19 on an 1100E

            Comment


              #7
              Originally posted by mrbridgeport View Post
              What are you running on your 850's? I think they are the same rims on there.
              Well, can't go by the rims on my 850s.

              On my '80 and my wife's '82, we have the stock 1.85 width, but in the different spoke patterns, appropriate for their years.

              My son's '81 is wearing rims from an '82 1100G, so it has a 2.15 rim up front.

              But they all have 100/90-19 tires.

              .
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment


                #8
                Humm, I just ordered the damn things, I am running a stock fender. Do you think I should change the order or risk the tight fit?

                Is the difference 10 mil? 5 on each side I assume.

                Comment


                  #9
                  The rim is only 1.85" wide so a 100 tire is a better fit although that doesn't stop some people from going with 110's.
                  Ed

                  To measure is to know.

                  Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                  Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                  Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                  KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                  Comment


                    #10
                    I had a 110 in the garage, it looks like it should clear the fender.
                    I'll let you know how it squeezes on the rim tomorrow. Will there be a big
                    difference in performance (the 100's compared to the 110?).




                    -j
                    Last edited by Guest; 08-17-2010, 05:33 PM.

                    Comment


                      #11
                      Originally posted by mrbridgeport View Post
                      Humm, I just ordered the damn things, I am running a stock fender. Do you think I should change the order or risk the tight fit?

                      Is the difference 10 mil? 5 on each side I assume.
                      The 110 will fit and be ok but it will steer like a truck/haley. Better with a 100/90

                      Comment


                        #12
                        Originally posted by mrbridgeport View Post
                        Will there be a big
                        difference in performance (the 100's compared to the 110?).
                        The 110s will require more effort to initiate a turn and might require holding that line in a turn.

                        The 100s will feel more nimble. Not only will they turn easier, they will probably require no effort to stay in that turn.

                        .
                        sigpic
                        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                        #2 son: 1980 GS1000G
                        Family Portrait
                        Siblings and Spouses
                        Mom's first ride
                        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                        (Click on my username in the upper-left corner for e-mail info.)

                        Comment


                          #13
                          Thanks guys,

                          I guess I'll order the 100 and send back that 110. The last thing I want is more work turning this thing. Thanks for the insight guys, I appreciate it!

                          Joe

                          Comment

                          Working...
                          X