Rear Master Cylinder

[cowboyup3371]

Unlike the front, the rear master cylinder was pretty easy to take apart so far. I still have the connection from the reservoir to the cylinder to take out but I'll do that tomorrow since I need to get to my vise in the shed first.

However, looking at this picture I know I need to do some pretty serious cleaning with brake cleaner to get the gunk off the rod and the inside of the cylinder. But, how do I know if I need a rebuild kit? What should I look for as I'm cleaning it?

Thanks.

[Steve]

How did the pedal feel before you took it apart?

If it was mushy, you need a kit.

If it was firm, you might not need a kit.

But, since you have it apart anyway, why not spend a few bucks and be sure of what you have.

.

[cowboyup3371]

Since I didn't get alot of miles on it before tearing it apart I really don't know the answer to your questions. So, maybe I will spring for a new kit. Thanks.

BTW, check your email please.

[Steve]

BTW, check your email please.

Done and answered.

.

[cowboyup3371]

Thank you very much kind sir.

[Big T]

It's the rubber parts that cause most of the braking problems, they're old, so replace them