Front Master Cylinder Replacement

[oohsam]

Hi All.
I need to get a front master cylinder for my bike. Gs1100 83.
Having some trouble finding one, is there anything else that I can use thats not OEM that will go straight on?
Its a dual disc. I been searching for a while but not sure if any dual disc master cylinder will work..

Cheers

[cowboyup3371]

Throw a post into the parts wanted section...i'm sure someone will have something. I had two laying around but they are missing various pieces that you need.

[Rauzer]

I'd think anything that will fit a 7/8 bar. On my Hayabusa I went from the stock one to a GSXR-1000 in order to change to a radial m/c. I'm going to put the stock hayabusa one on my GS650GL. The banjo's are the same size, just the thread pitch is off.

[oohsam]

Yeah i ended up getting a gsxr 1000 master cylinder with lever and reservoir.
I like the round reservoir better than the big ugly old square ones...

will post pics of it done!

[hjfisk]

You can buy anew one through Dennis Kirk , after market for $140.00. newer style but will work fine.Or try your local Suzuki dealer ,Babbitts claims they have a new on for $80.42.