Announcement

Collapse
No announcement yet.

Front M/C re-assembly

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Front M/C re-assembly

    So the rebuild kit I received seems to differ from what I pulled apart from the bike - I'm pretty sure it won't make a difference but I wanted to run it by the board before I end up cursing my mistake in a few days...

    Question 1 - When I originally pulled everything apart, there was a plastic washer somewhere in the mix. The rebuild kit does not have one. Is this going to make a difference for spacing?

    Question 2 - Just to confirm the order of install; piston/cup assembly, followed by washer, followed by circlip, and everything covered by dust boot, correct? Is there a trick to convincing the dust boot to seat properly?

    Thank you!
Working...
X