.png "Powered by vBulletin")
I am sure this has been asked before but i was wondering if a 93-95 GSXR (off of a 750,1100) front end fit on an 81 GS1100E? Without modification to the neck or the the triple trees of the donor GSXR front end. I am sure someone out there has done a similar swap and i am just entertaining the idea if is not to difficut. Thanks for the time, and any info.
-
-
There is a lot of info here:http://www.suzuki-katana.com/katana_suspension.html.sigpicJohn Kat
My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020 -
You will have to made a new steering stopper.
I usually weld a new tab on the frame, other drill hole and put bolts for steering stop.
Other than that, its bolt on.
Marchttps://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
1978 GS1000C X2
1978 GS1000E X2
1979 GS1000S
1979 gs1000
1983 gs400eComment
-
81 gs 1100e
All , Thanks for the info. That is just what i needed to know. I will know start the search for a new front end and hopefully i can score one cheap somewhere. Thanks again.Comment
-
There is one thing to watch though and it's ground clearance.
Lowering the suspension quickly highlights a lack of ground clearance going around the bends.
I had this issue with the mod I did on my GS 1000 equipped with GSXR 2nd gen components....
sigpicJohn Kat
My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020Comment
.png)
Comment