.png "Powered by vBulletin")
What rims will fit a stock gs 1100 swingarm along with sprockets and rotor. I would like to go about 5.5 inch wide. Thanks
-
-
I believe the widest you can fit is 4.5 inches.
My wheel comes from a GSXR 1100 K.
The 160 tire just clears the swingarm
Here are some pictures:
sigpicJohn Kat
My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020 -
Did you use the gs axle, sprocket and brake rotor?Comment
-
I have a 5.5 in a gs1100e swingarm on my 78 gs1000.
I used a mix and match gsxr and gs spacer to fit the wheel.
I went with the underslung gsxr caliper too.
Marchttps://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
1978 GS1000C X2
1978 GS1000E X2
1979 GS1000S
1979 gs1000
1983 gs400eComment
-
The axle is from the GS, the rest is from the GSXR 1100 K donor.Originally posted by harhazjr View Post
You need 6mm spacers on eitheir side as the GS swingarm is wider than the GSXR.
You will also need a 13 mm offset front sprocket for the chain to line up...
The chain will of course have to be a 530 model
sigpicJohn Kat
My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020Comment
Comment