Announcement

Collapse
No announcement yet.

Tire sizes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tire sizes

    Hi, Can somebody please tell me the correct tire sizes for my GS1100G 1982, and also the pressures please.

    Many Thanks

    #2
    not to be a dink, but would this not be in your owners manual, and if you don't have one you can get it here...I believe





    .

    Comment


      #3
      Front: 100/90-19
      Rear: 130/90-17

      Pressures: will depend on several factors, including tire manufacturer, your weight, the weight of anything you are carrying and your speed.
      Basic rule of thumb: start with a known (cold) pressure, say 30 psi. Go for a ride to warm up the tires (about 50 miles will do). Look for a 10% increase in pressure. The pressure increase is due to internal flexing of the tire. If pressure has risen more than 10%, the tires are flexing too much, so wait several hours for the tires, increase the pressure a bit, go for another ride. Note that if you carry a passenger, you will need more pressure in the rear tire, so there will be another couple of rides involved to determine your "loaded" pressure, too.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        32 psi front
        36 psi rear

        These are a good starting point. Use Steve's method to fine tune from there.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Tires

          Many Thanks Steve, just what I wanted.
          If I had a Manual I would have looked, don't you think ?

          Comment


            #6
            That's why I gave you the link, so you can get one, and I asked if you had one and if not where you could get it....

            sorry for the trouble

            .

            Comment


              #7
              On my '82 1100G, I run a 110/90-19 front and 130/90-17 rear.
              Perhaps some others will post what they run on their GS1100G's.

              Eric
              Last edited by Guest; 03-26-2012, 01:19 PM.

              Comment


                #8
                I run 32psi in the front and 35psi in the rear just like I do with the 850, it works for me.

                Comment

                Working...
                X