Many Thanks
Announcement
Collapse
No announcement yet.
Tire sizes
Collapse
X
-
thicklotto
Tire sizes
Hi, Can somebody please tell me the correct tire sizes for my GS1100G 1982, and also the pressures please.
Many ThanksTags: None
-
GateKeeper
not to be a dink, but would this not be in your owners manual, and if you don't have one you can get it here...I believe
.
-
Front: 100/90-19
Rear: 130/90-17
Pressures: will depend on several factors, including tire manufacturer, your weight, the weight of anything you are carrying and your speed.
Basic rule of thumb: start with a known (cold) pressure, say 30 psi. Go for a ride to warm up the tires (about 50 miles will do). Look for a 10% increase in pressure. The pressure increase is due to internal flexing of the tire. If pressure has risen more than 10%, the tires are flexing too much, so wait several hours for the tires, increase the pressure a bit, go for another ride. Note that if you carry a passenger, you will need more pressure in the rear tire, so there will be another couple of rides involved to determine your "loaded" pressure, too.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35694
- Torrance, CA
32 psi front
36 psi rear
These are a good starting point. Use Steve's method to fine tune from there.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
thicklotto
Tires
Many Thanks Steve, just what I wanted.
If I had a Manual I would have looked, don't you think ?
Comment
-
GateKeeper
That's why I gave you the link, so you can get one, and I asked if you had one and if not where you could get it....
sorry for the trouble
.
Comment
-
DanTheMan
Comment
Comment