.png "Powered by vBulletin")
I just installed 1100 forks on my 78 750 and it seems like the axle is too short. Is this as simple as getting the 1100 axle and machining some wider spacers? All help is truly apreciated!!!!
-
-
Should be... as long as the bearing sizes are the same. If not you might have to change the bearings & the inner spacer as well.
Do the rotors & calipers line up?1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/ -
I'm running into the same issue. The GS1000/GS750L/GS850L front axles are all about 5mm longer than the 78 GS750E....
E-bay... find a used one. Slap it in. Try to get it with the spacers if you can.Comment
-
I am using rotors from the 1150 which I think have a more nostalig look than the slotted versions. I will be using calipers from a Bandit and building custom brackets. The wheel bearings are the same size I just have to track down an axle. Thanks for the feedback guys.Comment
Comment