Thank you
Announcement
Collapse
No announcement yet.
Mikesxs damper valves
Collapse
X
-
Mikesxs damper valves
I'm considering installing a set of those valves on my Gs850. I understand that I will need some type of adapters because they are for the 35mm forks and I have 37mm. Does anyone have any DIY suggestions for the adapters (not looking to use a machine shop to have them made).
Thank youTags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13976
- London, UK to Redondo Beach, California
You need a lathe to turn them up... I looked at DIY making some as I'd done something similar with another fork but the 37mm GS fork is just the wrong size to make it easy.
I have a set with adapters in a set of 1100 forks ready to go on my GS1000.
I have another set on the shelf if I remember correctly that you can probably twist my arm for...1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
-
razooki
Thanks for the offer salty but I'm still on the fence about installing these valves. Do you by chance know the ID of the fork tubes?
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13976
- London, UK to Redondo Beach, California
28mm from memory..1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
Comment