Announcement

Collapse
No announcement yet.

1980 GS550E Front Master Cylinder...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1980 GS550E Front Master Cylinder...

    The original on mine is seized with rust beyond repair, and I bought a used on off Ebay but it doesn't have the reservoir on top. After countless hours looking for a reservoir to fit it, I thought about just getting a whole new master cylinder, possibly off of a different type of bike. What I need to know is will any 14mm front master cylinder off of another bike work if I swap over the whole setup?

    #2
    Yes, if the threads for the banjo bolt are the same thread and if it's made for 7/8" diameter bars.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment

    Working...
    X