Also, a bigger tire on a smaller rim puts less, lot more, rubber on the road.
Announcement
Collapse
No announcement yet.
Largest Tire size for stock GS750E wheel and swingarm??
Collapse
X
-
Originally posted by Wizard View Post
Also, a bigger tire on a smaller rim puts less, lot more, rubber on the road.1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES
-
Originally posted by Big T View PostFixerated that for you so we don't get no complaints here
Also, a bigger tire on a smaller rim puts less, lot more, rubber on the road.
Comment
-
GateKeeper
so on a serious note....is the air valve stem a standard size, like the same as in a car rim, or is it a different size ? is it specific to a motorcycle, or can I grab a couple of new ones from my local garage (non motorcycle shop)
Comment
-
GateKeeper
I get what your saying......so one small question....why is it worthwhile then putting on a gixer front end and rear end and rims and phat tires on these bikes as a whole package
for looks only ? or does it make the bike better ?
I don't know, so I am seriously asking
but going one size up is not good
I will learn something new today for sure.....
.
Originally posted by Wizard View PostWe keep wasting bandwidth on this subject.
If you want Looks, over Handling and Safety, buy a Harley.
A wider tire on the rear actually pushes harder on your front tire in a fast lean (think about the geometry, if you can ). You'll get a tank slapper.
Then you'll have to add a steering damper to help (not fix) the problem you created.
If anything, you should consider a narrower tire for rear.
Modern sport bikes are engineered for wide tires, a 83 GS 750 is not.
A narrower tire is actually cheaper.
Modern tires are pretty sticky.
Note: Its not that Harleys' aren't safe, you just don't push them in corners like a Sport Bike.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13999
- London, UK to Redondo Beach, California
Originally posted by mriddle View PostWas your 140 on the stock rim Billy ?
It was worn out so obviously been ridden that way. I didn't ride it more than a block myself..
The Brake Torque arm had been crushed to provide clearance & it had no chain guard on it so it obviously isn't a straight fit (at least on this one). I think it was a Mettzler but I can't be sure..1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
If you are a talented enough rider to get to where the stock tires/wheels are not adequate, there would be some performance to be gained by beefing up the frame, going with a more rigid swing arm, bigger wheels and modern tires, suspension and brakes...
The bike will be a little better if you know what you are doing.
Will it be anywhere near a modern sport bike? No.
Bolting on a few parts here and there won't help much, except for better shocks and brakes. Fat tires on skinny wheels is detrimental.
Comment
-
spyug
Fat tires on skinny wheels is detrimental.
Phat may be the look but lets keeping it on the ladies
Be safe folks.
Spyug
Comment
-
Originally posted by spyug View Post
Phat may be the look but lets keeping it on the ladies
Comment
-
Wizard
I guess you Can't imagine the geometry, let me try,,..
If you ride a High Performance bicycle, with 110psi skinny (less than 1" wide) tires, the energy/weight goes right down the middle of the frame, right down the middle of the of the tire, into the ground..
The rear wheel will ride exactly down the same track as the front wheel. Perfect.
Now imagine you are riding down Rodeo Drive, slipping first gear, with boom box blasting objectionable rap, on a bike that has a 24" wide rear tire and a 12" wide front tire (maybe that's not just imagining for some,,..).
If you go around a corner, the front tire will ride on the tire edge - 6 inches offset from center, and the rear tire will ride 12" off center.
Can you see the Geometry issues? What a mess. The rear tire point of contact is actually pushing the front tire sideways to some extent. The front tire already has issues scrubbing sideways to turn the bike, without the rear tire making it worse.
If you want Phunky looks, you own the wrong bike.
If you wanna experiment and build some abomination, get Ruphus over with a few cases of Shlitz and give'r with the wrenches. Just don't try to Sport Ride it, without first putting me in your Will.
Comment
-
Do you think the OP is still reading thsi thread, or you guys just chatting amongst yourselves?1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SES
Comment
-
Hmmm, yes?
Originally posted by Big T View PostDo you think the OP is still reading thsi thread, or you guys just chatting amongst yourselves?sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.
Comment
-
DannyMotor
When its time for new rubber I'm getting a 120 rear. If you like riding spirited and enjoy turning safely... just mho.
Comment
Comment