Announcement

Collapse
No announcement yet.

Widest rear tire on a GS450?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Widest rear tire on a GS450?

    I replaced my rear tire with a Shinko enduro style that is slightly more narrow than stock, because I wasn't sure that the next size up from the original size would fit. I could only find a couple in the stock size, and they were pretty expensive.
    Anyway, seeing it on the bike, it looks like the next size up from stock might fit.
    So, how wide can I go back there? Bike is an 81 GS450 with the star-shaped mag wheels.
    Last edited by Guest; 10-28-2012, 02:35 PM.

    #2
    Your rear wheel is only 1.85" wide, I believe the tire of choice is going to be a 110/90-18.

    One choice might be the Shinko 712. You might be able to afford it, it's a whopping $47 from Motorcycle Superstore.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      I actually went with this on the rear: http://www.shinkotireusa.com/product/product.php?id=60 and wanted to do the same for the front. I did a 3.00-17 on the rear. I really feel like a dope now, I keep forgetting the wheels aren't the same size. The front has a 90/90-19, so I figure on this: http://www.jcwhitney.com/shinko-univ...rid=c51715u0j3
      I am still curious how wide I could have went on the rear.
      Last edited by Guest; 10-28-2012, 02:40 PM.

      Comment


        #4
        I can tell you I safely run a Pirelli Scorpion Trail 100/90-18 on the front and a Pirelli Scorpion MT90 A/T 4.10-18 on the rear. I wouldn't go larger with either. The front would be a tight squeeze with the stock guard but Lurch runs the same size and says it's ok.

        Good quality matched dual sports in 18" aren't available here in Aus which is why they're different.
        1982 GS450E - The Wee Beastie
        1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

        sigpic

        450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

        Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

        Comment


          #5
          I went with the Shinko 712 100/90-18 for front and 110/90-18 for rear at $94/set shipped to my door from motorcycle-superstore.com. They handle much better than any of those old school new 3.00 and 3.50 tires which were original. Too bad you wasted your $ on that rear already. BTW, I also went tubeless and those old school ones are tube type. I will add a disclaimer that the rims are not tubeless stamped , but I max the 85mph speedo and hit the corners pretty good and logged close to 2k miles without any issue....but if you're the by the book type then no problems putting tubes in the Shinko 712's, just a little trickier mounting the tires if you do yourself.
          No problems clearing the front fender and rear chain guard and swingarm with the Shinko 712 sizes I used.
          I was tempted to go with a set of Shinko 705's for non paved use too but 120/80-18 rear might rub the chain guard and the 110/90-18 front wouldn't clear the front fender.

          My bike is a '80 GS450E which are the same wheels as the '81 GS450S (I think you have, right?...but I can't see your facebook link pics)
          If not then you may have an L or T model so check your rims again and report back to us.
          Last edited by Guest; 10-29-2012, 04:16 PM.

          Comment


            #6
            I have the star-shaped mags, 17" rear, 19" front. It's a 450TX.
            The rear tire was $45, and the matching front is close to the same. I went with the enduro style because I do have to deal with a lot of gravel. I have no rear fender, and my front fender is not stock, so I have the height clearance.
            My bike is really only going to see commuting duty, and backroad cruising.
            Last edited by Guest; 10-30-2012, 10:57 AM.

            Comment

            Working...
            X