Announcement

Collapse
No announcement yet.

GS1000 front end conversion/upgrade options?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by posplayr View Post
    Nice you allowed for some adjustment in ride height. The Ohlins is a nice shock; is it also 89 GSXR 1100?

    I'm running a 170/60-18 Dunlop Road smart and it is wearing nicely on my 4.5x18" 3 spoke. I bought a conversion once which had a 160/60-18 road pilot on a 4x18" wheel and I did not like the way to wore. The Dunlop seems to maintain a much better profile.

    I also have the 88 GSXR 1100 forks, with what I believe are progressive springs and the race tech emulators and 15W oil. Once they are setup , I have no complaints. I also have a stiff 1/2" or so aftermarket fork brace.

    Make sure you drill the holes in the proper spots on the damper rods. The PO that I got my forks from had not done so correctly and so I had to re disassemble and redrill after a bit of hard ridding.
    Yes, the Ohlins is for a GSXR 1100 K.
    I'm an absolute fan of the Michelin Pilot Road 3's for radial tires.
    This is the first tire that wears evenly especially on the front
    I like to carry a lot of entry speed in the turns ( despite my age...) and after 3 thousand km on average the front tires go into a triangular shape making the steering very heavy
    It is quite difficult to find a proper radial tire for 4*18 rear wheel.
    I was thinking about an Avon Storm 2 Ultra ?
    Have you tried these?
    Thanks for the tip on the forks!
    sigpicJohn Kat
    My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
    GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020

    Comment


      #32
      Originally posted by John Kat View Post
      GSXR 89/43mm/745mm/RSU/17"
      Is this for both the GSXR750 and the GSXR1100?
      Thanks!
      2000 Honda Valkyrie Tourer (it's gone)
      1985 Suzuki Madura GV1200
      2 X 1980 Suzuki GSX1100ETs (next project
      s)

      Comment


        #33
        Originally posted by quexpress View Post
        Is this for both the GSXR750 and the GSXR1100?
        Thanks!
        I would believe so but I can't garantee that
        sigpicJohn Kat
        My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
        GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020

        Comment


          #34
          Thanks John!
          2000 Honda Valkyrie Tourer (it's gone)
          1985 Suzuki Madura GV1200
          2 X 1980 Suzuki GSX1100ETs (next project
          s)

          Comment


            #35
            Originally posted by russr33 View Post
            I have this pic and seem to recall someone saying it was some mid 2000's katana front end but not sure.


            that is actually diamondj's bike in the photo, and he runs vtr1000f Honda Superhawk forks. 41mm RSU 775 mm length adjustable preload and rebound cartridge forks, 20mm axle. Honda CBR600F2 wheels I believe, and possibly triple. I must note that using a triple off of one of these bike either requires an extreme frame elevation change to steepen your rake, or slight steepening of rake in conjunction with 17 inch wheels. 19" wheel will not do well at all with minimal offset modern triples. Steering will be horribly heavy will not do well at all with minimal offset modern triples. just wanted to update the info, I realize this is an old thread, but very useful info that I found using the search function.
            '77 GS750 920cc heavily modded
            '97 Kawasaki KDX220R rugged terrain ripper!
            '99 Kawasaki KDX220R​ rebuild in progress
            '79 GS425stock
            PROJECTS:
            '77 Suzuki PE250 woods racer
            '77 GS550 740cc major mods
            '77 GS400 489cc racer build
            '76 Rickman CR1000 GS1000/1100
            '78 GS1000C/1100

            Comment


              #36
              89-90 GSXR1100K 43mm adjustable cartridge forks

              I inquired with Racetech about not seeing any Gold Valve kits on their site for these 745mm tall 43mm tube 310mm brake fully adjustable rebound/compression/preload cartridge forks that look very similar to the newer ZRX1100 Forks with the compression adjustment below the brake mounts:

              Originally posted by MattWiley@RaceTech

              Originally posted by Chuck78 via email View Post
              Subject: 1989-90 Suzuki GSXR1100 forks

              Do you offer any Race Tech gold valve fork kits for the 1989-90 Suzuki GSXR1100 forks? In your product search, it says "RT Only." does this mean that you do not have any kits available for purchase, but RaceTech can perform a revalve but requires sending the fork to RaceTech?
              Thank you for inquiring. Yes these forks 43mm forks use 23mm Cartridges & should be sent to Race Tech for revlaving service. I just setup one of these for an AHRMA Vintage Road Racer & it required a lot of parts shuffling. We have valves that work well but require some modifications & use of extra parts not included in the kits that would make end user install a confusing & difficult tech support issue. The stock valving is very crude & the rebound valving should be addressed when using stiffer spring rates as OEM setup will be overwhelmed otherwise. The Race Tech rebound Gold valve that is used here requires a custom piston band be used for fitment into the cartridge.

              Best option is to send forks into us at RT, our labor charge is very reasonable: http://racetech.com/ProductSearch/2/...-R1100/1989-90

              Send in fork service is turn key as the completed forks are returned ready to install on the motorcycle. Typical shop turnaround time is 10 days, please use the attached form when sending the forks in for service. We will contact you with details & to confirm what you wish upon inspection of the forks.

              Thank you for choosing Race Tech!

              Matthew Wiley
              Race Tech Suspension
              951-279-6655 RT ext# 108
              mwiley@racetech.com
              these would be the 17 inch wheel forks that come after the models with anti-dive devices but before the models that were all upside down forks, 2 years only. They are identifiable by the lack of anti-dive mechanisms and the presence of a casting knob below the caliper mounts with a compression adjuster screw, and top rebound adjuster screw inside of the spring preload adjuster.




              '77 GS750 920cc heavily modded
              '97 Kawasaki KDX220R rugged terrain ripper!
              '99 Kawasaki KDX220R​ rebuild in progress
              '79 GS425stock
              PROJECTS:
              '77 Suzuki PE250 woods racer
              '77 GS550 740cc major mods
              '77 GS400 489cc racer build
              '76 Rickman CR1000 GS1000/1100
              '78 GS1000C/1100

              Comment


                #37
                I am trying a complete front end off a 95 Triumph Sprint that is a parts bike.43mm fork. 800mm length. Bolted right up. Needed top bearing & extra washer for lock nut. Using Bandit rear, but could use some help with set up. Trying to use 14.25" shock
                Attached Files
                Current Rides: 82 GS1100E, 00 Triumph 955 Speed Triple:twistedevil:, 03 Kawasaki ZRX1200, 01 Honda GL1800, '15 Kawasaki 1000 Versys
                Past Rides: 72 Honda SL-125, Kawasaki KE-175, 77 GS750 with total yosh stage 1 kit, 79 GS1000s, 80 GS1000S, 82 GS750e,82 GS1000S, 84 VF500f, 86 FZR600, 95 Triumph Sprint 900,96 Triumph Sprint, 97 Triumph Sprint, 01 Kawasaki ZRX1200, 07 Triumph Tiger 1050, 01 Yam YFZ250F
                Work in progress: 78 GS1000, unknown year GS1100ES

                Comment


                  #38
                  Twin shock conversion to swinger? Or monoshock conversion to frame? 14.25" sounds awful long for a momo, so I assume 14.25" twin shocks with welded on Clevis mounts like another member or more have done on the forum?
                  '77 GS750 920cc heavily modded
                  '97 Kawasaki KDX220R rugged terrain ripper!
                  '99 Kawasaki KDX220R​ rebuild in progress
                  '79 GS425stock
                  PROJECTS:
                  '77 Suzuki PE250 woods racer
                  '77 GS550 740cc major mods
                  '77 GS400 489cc racer build
                  '76 Rickman CR1000 GS1000/1100
                  '78 GS1000C/1100

                  Comment


                    #39
                    Twin shock style. Getting clevis and other hardware from suzuki_katana.com. In a recent post people recommended using 14.25" vs 13" stock. So having to weld on a clevis at this point I could mount it where required. There was 2 reasons I wanted to try a longer shock. First being, in the thread that the general consensus was that a 14.25 shock greatly improved handling. I have a set of freshly rebuilt ZRX1200 shocks that I could use and would only require a lower shock mount which can be done locally. I want a set of Bi-Tubo's for the ZRX and I need a set of shocks any way.
                    Current Rides: 82 GS1100E, 00 Triumph 955 Speed Triple:twistedevil:, 03 Kawasaki ZRX1200, 01 Honda GL1800, '15 Kawasaki 1000 Versys
                    Past Rides: 72 Honda SL-125, Kawasaki KE-175, 77 GS750 with total yosh stage 1 kit, 79 GS1000s, 80 GS1000S, 82 GS750e,82 GS1000S, 84 VF500f, 86 FZR600, 95 Triumph Sprint 900,96 Triumph Sprint, 97 Triumph Sprint, 01 Kawasaki ZRX1200, 07 Triumph Tiger 1050, 01 Yam YFZ250F
                    Work in progress: 78 GS1000, unknown year GS1100ES

                    Comment

                    Working...
                    X