anyone know where this bracket attaches?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gregory
    Forum Sage
    Past Site Supporter
    • Sep 2012
    • 2062
    • Southlake - DFW - North Texas

    #1

    anyone know where this bracket attaches?

    I just put the front end back together and cannot remember where this bracket that holds the brake line is attached.

    It has a tab that sticks out from the flat part so I assume it goes in a very specific place.

    82 gs1100e FAUX Skunk
    80 gs1000s
  • tkent02
    Forum LongTimer
    Past Site Supporter
    • Jan 2006
    • 35571
    • Near South Park

    #2
    The bolt that holds the gauges on.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment

    • Gregory
      Forum Sage
      Past Site Supporter
      • Sep 2012
      • 2062
      • Southlake - DFW - North Texas

      #3
      aha, thank you. i havent put the gauges back on yet so that didnt occur to me.
      82 gs1100e FAUX Skunk
      80 gs1000s

      Comment

      • BassCliff

        #4
        Hi,

        I seem to recall that's the bracket that holds the brake line in place. It bolts up with the gauges, on the under side. Let me know if you need a pic of the final assembly. I'll have to go out to the garage and snap one.


        Thank you for your indulgence,

        BassCliff

        Comment

        • Gregory
          Forum Sage
          Past Site Supporter
          • Sep 2012
          • 2062
          • Southlake - DFW - North Texas

          #5
          Many thanks BassCliff, no need to snap a pic.

          After posting and getting instruction on it, I realized that I had not run the lines and throttle cables through the inside of the forks.

          After I redid that, it now looks like it will bolt up correctly.
          82 gs1100e FAUX Skunk
          80 gs1000s

          Comment

          • Guest

            #6
            The top fork clamp.

            Comment

            Working...