Announcement

Collapse
No announcement yet.

anyone know where this bracket attaches?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    anyone know where this bracket attaches?

    I just put the front end back together and cannot remember where this bracket that holds the brake line is attached.

    It has a tab that sticks out from the flat part so I assume it goes in a very specific place.

    82 gs1100e FAUX Skunk
    80 gs1000s

    #2
    The bolt that holds the gauges on.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment


      #3
      aha, thank you. i havent put the gauges back on yet so that didnt occur to me.
      82 gs1100e FAUX Skunk
      80 gs1000s

      Comment


        #4
        Hi,

        I seem to recall that's the bracket that holds the brake line in place. It bolts up with the gauges, on the under side. Let me know if you need a pic of the final assembly. I'll have to go out to the garage and snap one.


        Thank you for your indulgence,

        BassCliff

        Comment


          #5
          Many thanks BassCliff, no need to snap a pic.

          After posting and getting instruction on it, I realized that I had not run the lines and throttle cables through the inside of the forks.

          After I redid that, it now looks like it will bolt up correctly.
          82 gs1100e FAUX Skunk
          80 gs1000s

          Comment


            #6
            The top fork clamp.
            1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
            1985 GS1150ES stock with 85 Red E bodywork.

            Comment

            Working...
            X