Announcement

Collapse
No announcement yet.

1978 gs1000e Rear Rotor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1978 gs1000e Rear Rotor

    Does anyone know what thickness is acceptable for a rear rotor?

    It is pretty badly grooved and guessing that it looks a little on the thin side.

    New ones on ebay are about $200 which is WAY out of my budget.
    82 gs1100e FAUX Skunk
    80 gs1000s

    #2
    the service limit is 6mm but if they are really badly scored then it will not do your pads much good. if there is still a good thickness you could see about getting them skimmed
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment


      #3
      you can buy good ones from ebay, like this one......



      good condition and quite cheap
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment


        #4
        Much appreciated !
        82 gs1100e FAUX Skunk
        80 gs1000s

        Comment

        Working...
        X