Help!! 79 GS1000 Master cylinder rebuild

[Guest]

When I took it apart all the parts came out at once and dropped on my bench so I didn't get a look at the order.. Here is a picture of how I think it goes together, I'd like some confirmation though.

https://picasaweb.google.com/102601857000444202563/GS1000MasterCylinder#5865399523639920098

Well thanks to the forum I found out what was causing the front brakes to lock up. The pressure release port was clogged, besides that it was full of what looked like silicon sealer from the old brake fluid that had hardened.

Thanks in advance for any help that comes.

[Nessism]

The photo looks correct.

BTW, in case you didn't know, you need to change your brake lines and clean out the caliper(s) since they are likewise full of sludge. Flushing doesn't get it here. Only a proper tear down and clean out will work.

[althomas101]

Wow that was quick! Thanks, I'm getting new lines and the calipers will get refreshed as well before assembly. You only get one life after all. Thanks for the confirmation.