gs750 suspension conversion

[Toasty]

Thanks, I will assume the 04 1000 fork has the same stem length as I remember the 1000 forks/stem being a straight swap (am I wrong on this?).



Any chance you have the part #s I need to slot in the 03-04 GSXR 1000 front end?

For my 2002 750 front end it was 99-3540-5 and 99-3519-5, but double check on their site. Look under fork conversions and plug in your bike's info.

[silverbullet132]

For my 2002 750 front end it was 99-3540-5 and 99-3519-5, but double check on their site. Look under fork conversions and plug in your bike's info.

They do not list ANY GSXR 1000s on there, so:

GSXR1000 UPPER:
30 mm inner diameter, 55 mm outer race diameter, and 17 mm height

GSXR1000 LOWER:
30 mm inner diameter, 55 mm outer race diameter, and 17 mm height

To fit the gs, I need 30x48x13 top and 30x48x14 bottom. All balls does not have these sizes. When I call a few bearing shops tomorrow, it is tapered roller bearings I am looking for? Not sure what kind to get, never had the front end off a bike before.

[jwhelan65]

They do not list ANY GSXR 1000s on there, so:

GSXR1000 UPPER:
30 mm inner diameter, 55 mm outer race diameter, and 17 mm height

GSXR1000 LOWER:
30 mm inner diameter, 55 mm outer race diameter, and 17 mm height

To fit the gs, I need 30x48x13 top and 30x48x14 bottom. All balls does not have these sizes. When I call a few bearing shops tomorrow, it is tapered roller bearings I am looking for? Not sure what kind to get, never had the front end off a bike before.

Tapered or they are also known as Timken bearings

[silverbullet132]

Tapered or they are also known as Timken bearings

Thanks.

Anyone ever heard of this brand? They have the top bearing size I need but not the bottom listed:

http://www.ebay.com/itm/Tapered-roller-bearings-30x48x13-mm-/390351549790?pt=AU_Motorcycle_Parts_Accessories&hash=item5ae2c3f55e&vxp=mtr

[silverbullet132]

Update:

Front end ordered. Possible to fit an 01-05 GSXR 600/750 rear rim on a bandit 1200 swingarm?