Anyone think it is possible? or would the top bracing on the GSXR arm bang up against the frame? I am relocating all the electrics from under the seat to behind it, and cutting off the passenger peg mounts.
Announcement
Collapse
No announcement yet.
GSXR 1000 rear end on GS750
Collapse
X
-
GSXR 1000 rear end on GS750
Looking at installing a 03 GSXR 1000 rear end to match the front, here is some specs: 228mm pivot, 25mm bolt might me off by a few mm (seller used a measuring tape)
Anyone think it is possible? or would the top bracing on the GSXR arm bang up against the frame? I am relocating all the electrics from under the seat to behind it, and cutting off the passenger peg mounts.Tags: None
-
silverbullet132
Originally posted by Agemax View Postanything is possible, with a bit of grinding,cutting,welding etc. i doubt its a straight bolt on but give it a go.
keep us posted on how its going
Comment
-
Originally posted by silverbullet132 View PostThanks my main concern is the top bracing on the swingarm smashing up on the subframe. Would be using a monoshock setup if I went with this as the GSXR arm has no room for twin shock mounts.
take a look at my avatar pic, thats the way i work and it hasn't failed (yet).1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!
Comment
Comment