Announcement

Collapse
No announcement yet.

1980 GS1000G shock bushings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1980 GS1000G shock bushings

    Are these not replaceable? Mine are rotted (one is completely gone) and I am trying to avoid having to spend big bucks on new shocks before the bike is even running, and according to the parts fiche it Suzuki doesn't sell a replacement- they are only included with the shocks.

    Does that mean they can't be replaced? If they can, anyone know where to get them?

    #2
    Hi,

    I think it is possible to modify the bushings used for the foot pegs if you have access to a drill press and a bearing press.

    For example, I ordered part# 09319-10008 for my bike (yours uses the same part number) and the outside diameter seems the same as the shock eye but the inside diameter needs to be drilled out a little to fit the 12mm shock stud. I haven't had a chance to borrow a drill press to try and fit them yet. I've been using rubber bushings on my cheap MDI shocks. I replace the rubber bushings every time I replace the rear tire.



    I till have to drill out the I.D. of the rubber bushings a little bit to make everything fit. And they wear out after 10,000 miles or so.


    Thank you for your indulgence,

    BassCliff

    Comment


      #3
      you can buy sets of universal bushes for motorcycle shocks on ebay, like this one......



      just search for "motorcycle shock bushes" and it brings up loads of different listings
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment


        #4
        Cool, thanks fellas.

        Comment

        Working...
        X