83 gs1100e 88-89 gsxr 750 wheel swap

[JamieXD]

Hey guys im a member on the katriders forum, nd I recently picked up an 83 gs1100e

I've been doing a lot of research but I can't seem to find a detailed thread on this subject.

Sooooo I figured I'd ask the experts!

What exactly would I need to run a 88-89 gsxr 750 4.5x17 with 5 cush drive slots on my stock aluminum swing arm.

What then plan was is to use the GS 5 cush drive sprocket carrier, gs 20mm axle, gsxr 750 wheel, and gsxr 750 rotor.

Anyone have any info on this swap?

Thanks guys!

[posplayr]

You will also need custom spacers and a 3/8" offset sprocket.

[jwhelan65]

What are your plans with the front end?

[JamieXD]

You will also need custom spacers and a 3/8" offset sprocket.

Would I still be able to use the 630 chain or would I have to do a 530 conversion?

Also I should be able to use the GS rear brake setup still right?

[JamieXD]

What are your plans with the front end?

I actually have my gsx600f front end on the GS right now, but I didn't anticipate the steering stop and the clip one hitting the tank.

So I decided to use a 87-90 cbr600f hurricane 37mm front end with the GS triples, all I need is the front brakes to complete the swap